Climbing Rose Rosa 'Morning Jewel' (ClF)

Water

Climbing roses like Rosa 'Morning Jewel' should be watered deeply to encourage strong root growth, typically requiring about 1 inch of water per week, depending on weather conditions. In the absence of sufficient rainfall, watering should be done by soaking the base of the plant, avoiding overhead watering to reduce the risk of disease. Use a soaker hose or drip irrigation for the most efficient watering, aiming for at least 1 gallon per plant during each watering session. During hot, dry periods, you may need to water twice a week, while in cooler, moist conditions, reduce the frequency to prevent overwatering.

Light

The climbing rose 'Morning Jewel' thrives best in full sunlight, needing a minimum of 6 hours of direct sun per day. An ideal spot is an east-facing or south-facing location where the plant can receive morning sunlight and some partial shade during the hottest part of the afternoon. Avoid heavily shaded areas to promote healthy growth and abundant blooms.

Temperature

Climbing roses like 'Morning Jewel' prefer moderate temperatures and will flourish when daytime temperatures are between 65 and 75 degrees Fahrenheit. They can tolerate minimum winter temperatures down to about 20 degrees Fahrenheit but may need protection in colder climates. The ideal temperature range for this climbing rose is such that it can grow successfully in USDA hardiness zones 5 through 9.

Pruning

Pruning a 'Morning Jewel' climbing rose is essential for maintaining plant health and encouraging vigorous blooming. Prune in late winter or early spring, just as the buds begin to swell, removing dead or diseased wood and opening up the center of the plant to increase air circulation. Deadhead spent flowers throughout the blooming season to promote continuous blooms. Major pruning should be done every 3 to 5 years to rejuvenate the plant.

Cleaning

As needed

Soil

The best soil mix for the Climbing Rose 'Morning Jewel' should be well-draining with a mix of loam, compost, and aged manure to enrich the soil. The ideal pH for Climbing Roses is slightly acidic to near-neutral, ranging from 6.0 to 7.0.

Repotting

Climbing Roses like 'Morning Jewel' are typically planted outdoors and do not require repotting. They should be planted in a permanent location where they can establish a strong root system.

Humidity & Misting

Climbing Rose 'Morning Jewel' is adaptable to a wide range of humidity levels and thrives outdoors where the humidity is natural and not regulated.

Suitable locations

• Indoor

  Provide Climbing Rose 'Morning Jewel' with bright light and air circulation inside.

• Outdoor

  In the garden, plant Climbing Rose 'Morning Jewel' in full sun.

• Hardiness zone

  5-9 USDA

Life cycle

The life of a 'Morning Jewel' Climbing Rose (Rosa 'Morning Jewel') begins with germination, which occurs when its seeds are exposed to the right combination of moisture and temperature, leading to the emergence of a seedling. Following germination, the seedling grows into a young plant—a period characterized by rapid vegetative growth where leaves, stems, and roots develop. As the plant matures, it enters the flowering stage, producing pink blooms that are attractive to pollinators; during this phase, the plant undergoes sexual reproduction if the flowers are pollinated, leading to the formation of hips (fruit) containing seeds. After the reproduction stage and seed formation, the climbing rose enters a period of senescence towards the end of the growing season where growth slows down and leaves may drop; however, being a perennial plant, it goes dormant in the winter rather than dying. The plant resumes growth from its root system in the spring, potentially for many years if provided with suitable growing conditions and proper care. This cycle of dormancy and renewal repeats annually, with the rosebush growing larger and producing more blooms as it ages.

Propogation

• Propogation time

  Spring to early summer

• Propogation: The Rosa 'Morning Jewel', commonly known as a climbing rose, is best propagated through softwood cuttings taken in late spring or early summer. This method involves cutting a healthy, non-flowering stem of about 6 to 8 inches (15 to 20 centimeters) long, just below a leaf node, where the concentration of the plant's natural rooting hormones is high. The lower leaves are removed, and the cut end is dipped in a rooting hormone to enhance root development. The prepared cutting is then planted in a pot filled with a mix of peat and perlite, ensuring at least two leaf nodes are below the soil surface to encourage roots to grow. The pot is kept in a warm, bright area but out of direct sunlight, and the soil is kept consistently moist but not waterlogged. In a few weeks, the cuttings should start to develop roots, and once they are well established, they can be transplanted to their final location in the garden.